Sigma 3E2K KLICK KLOCK Professional Tile Cutter
Quality Sigma tile cutter- Made in Italy.
The Sigma 3E2K KLICK KLOCK Professional Tile Cutter is designed to cut a range of tiles up to 20mm thick. This manual tile cutter has a tungsten carbide scoring wheel that scores the tile by pushing the breaker along the surface of the tile. Flipping the handle over and pushing down applies the breaker to the tile. This breaks the tile while the sprung-loaded base plates on the tile cutter absorb the impact.
The Sigma 3E2K KLICK KLOCK Professional Tile Cutter has a swivelling measurement bar rotates through 45 degrees in both directions with a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches.
This new version Sigma 3E2K KLICK KLOCK Professional Tile Cutter includes the quick-change system on the guide rail allowing the handle type to be changed to a standard or Max if required. These extra handles are not supplied with the Sigma tile cutter and must be purchased separately.
With a weight of 30kg, the maximum straight cut length is 128cm and diagonal cuts can be made on tiles measuring up to 90x90cm.
Breaking Strength of this Sigma tile cutter is 1200kg