Sigma 3C3M MAX SERIES Tile Cutter
The Sigma 3C3M MAX SERIES Tile Cutter is designed to cut a range of tiles up to 19mm thick. This manual tile cutter is especially suited to uneven and porcelain tiles. This is due to the spring loaded, vibration dampened breaker, which can score thicker tiles or those with relief surfaces with less effort and higher accuracy.
The tungsten carbide scoring wheel on the Sigma 3C3M MAX SERIES Tile Cutter has a ball bearing mounting for smooth operation and scores the tile by pushing the breaker along the surface of the tile. Moving the breaker handle upwards quickly breaks the tile while the sprung-loaded base plates of the tile cutter absorb the impact.
This Sigma Tile Cutter model has a swivelling measurement bar that rotates through 45 degrees in both directions with a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches.
This new 2015 version Sigma 3C3M MAX SERIES tile cutter features a redesigned push lever handle with an extra 2cm of breaking fulcrum that provides greater rigidity during breaking compared to the previous version Sigma 3C2M Tile Cutter.
A quick-change system on the guide rail allows the handle type to be changed to a standard or Klick Klock if required. These extra handles are not supplied with the Sigma 3B3M MAX SERIES tile cutter and must be purchased separately.
The Sigma 3C3M MAX SERIES Tile Cutter weighs 11.8kg. The maximum straight cut length is 72.5cm and diagonal cuts can be made on tiles measuring up to 51.3x51.3cm.
The breaking Strength for Sigma 3C3M MAX SERIES Tile Cutter is 1200kg.