Sigma 3P3M MAX SERIES Professional Tile Cutter
The Sigma 3P3M MAX SERIES Tile Cutter is a professional, quality manual tile cutter made in Italy.
This model of manual tile cutter has been designed to cut a range of tiles up to 20mm thick and is especially suited to uneven and porcelain tiles. This is due to the spring loaded, vibration dampened breaker, which can score thicker tiles or those with relief surfaces with less effort and higher accuracy.
The Sigma 3P3M MAX SERIES Tile Cutter has a tungsten carbide scoring wheel which has a ball bearing mounting for a smooth operation. This manual tile cutter scores the tile by pushing the breaker along the surface of the tile. Moving the breaker handle of the tile cutter upwards quickly breaks the tile while the sprung-loaded base plates absorb the impact.
The Sigma 3P3M MAX SERIES Tile Cutter has a swivelling measurement bar that rotates through 45 degrees in both directions and has a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches.
This new 2015 version Sigma 3P3M MAX SERIES tile cutter features a redesigned push lever handle with an extra 2cm of breaking fulcrum that provides greater rigidity during breaking compared to the previous version Sigma 3P2M Tile Cutter.
A quick-change system on the guide rail allows the handle type to be changed to a standard or Klick Klock if required. These extra handles are not supplied with the Sigma 3P3M MAX SERIES tile cutter and must be purchased separately.
The Sigma 3P3M MAX SERIES Tile Cutter weighs 20.7kg. The maximum straight cut length is 100.5cm and diagonal cuts can be made on tiles measuring up to 71x71cm.
Sigma 3P3M MAX SERIES professional manual tile cutter has a breaking Strength of 1300kg.