Stabila LAX300 Self Levelling Cross Line Laser Level 18327

Stabila LAX300 Self Levelling Cross Line Laser Level - 18327

The Stabila LAX300 Self Levelling Cross Line Laser is a self-levelling, ultra sharp, cross-line laser with a visible line range of 30m indoors. The laser produces one horizontal line, one vertical line and a plumb-line which points upwards and downwards. The vertical line marks the floor, walls and ceiling, while the plumb line dots mark the starting point of the line.

The laser has 4 modes: Horizontal Only, Vertical Only, Cross-Line and Fixed Cross-Line for angles. The LAX300 cross line laser is ideal for tilers, dry wallers, carpenters & joiners, electricians, plumbers, steel erectors and bricklayers. The housing has an integrated magnetic mount with v groove and rare earth magnet, allowing for easy positioning on the ground, on metal & pipework.

The extendable foot means the height of the laser can be adjusted, for example so that the beam is not obstructed by drywall track. If required the laser can be attached to a tripod (not included) using the thread. The casing within the U-shaped holder can be rotated through 360 degrees to allow the entire room to be scanned, while the locked position allows slopes to be marked. Automatic pendulum locking provides full protection for the optical equipment in the parked position with optimum dust protection. Stabilas anti-shock system provides optimal protection for the casing with an impact-absorbent cover and added protection at corners and edges.

The laser housing also offers protection against water and dust to IP54. The pulsed line makes this laser suitable for use with the optional Stabila REC220 Receiver, allowing use with a range up to 50m in a straight line.

Target plate, wall plate and carry case included.

Stabila Art No 18327