Stabila's LAR250 Self Levelling Rotation Laser Level Set is suitable for use both indoor and outdoor use.
THIS ITEM WILL BE ORDERED IN FROM OUR SUPPLIER. PLEASE ALLOW 1-2 WORKING DAYS FOR DELIVERY
It is particularly suited for major projects, fitting out, dry walling, superstructures, masonry work, concrete construction and formwork. The laser can be mounted on the tripod or placed directly onto the ground. The eight functions of the laser are:
Point - Laser beam visible as a dot on viewed surface
Point With 90 Degree Penta Prism - Beam emitted at right angles to horizontal beam
Plumb-Line - Transfers a determined point from floor to ceiling
Line (Horizontal) - A horizontal line is projected onto the wall
Line (Vertical) - A vertical line is projected onto the wall
Rotation (Horizontal) - The beam rotates horizontally through 360 degrees
Rotation (Vertical) - The beam rotates vertically through 360 degrees
Inclination - Inclination of the levelling plane by +/- 5 degrees to meet requirements
A convenient remote control is included that can be used to operate the unit and switch between functions from a distance. The extremely robust patented Stabila Protector System ensures that this laser level can endure the rigors of construction site use. This robustness was demonstrated by a four-stage procedure with a drop test, water test, heat test and dust test. The use of rubber reinforcements at each edge cushion against severe impact if the tripod is accidentally knocked over, and the housing is also water and dust-proof to IP65. The levelling accuracy is +/- 0.1mm per metre and the horizontal self-levelling range is approximately +/- 5 degrees.
The included Stabila REC 300 Digital Receiver measures more intelligently so that you can work more efficiently. With two easily readable digital displays, one on the front and one on the back, symbols indicate your distance from the reference height and whether you are too low or high. The REC300 also allows you to read off in millimetres the exact deviation from the reference point. The two sensitivity levels allow for simple set up when switching between long and short distance measuring. When acoustic signals are turned on a choice of two volume levels can be chosen. The 100mm high laser reception window means that this receiver can be used outside over a range up to 350m at 21 Degrees Celsius in optimum atmospheric conditions. The receiver is also water and dust-proof to IP67.
Also within this set is Stabila's BST-K-L Construction Tripod with lifting column and spread stopper. Made from lightweight but sturdy aluminium, this has a height of approximately 220cm and weighs 6.5kg. Using the Laser Goggles improves the visibility of the laser beam by 50%, while the Target Plate with rule is coated to provide optimum reflection for ease of work even in daylight conditions or over long distances.
The set contains the following:
LAR250 Self-Levelling Automatic Rotation Laser
REC300 Digital Receiver With Clamp
90 Degree Angle Rail
Type NL Levelling Rod
Type BST-K-L Construction Tripod
Type LB Laser Goggles
Click 'View Video' To See A Demonstration Of This Product In Use - Note That The Following Items Shown In The Video Are Not Included In This Set - SB Tripod Mount (For Attaching Under Lifting Column), NK 100 Base Plate