Sigma 3D2K KLICK KLOCK Series Professional Tile Cutter
Quality Sigma tile cutter- Made in Italy.
THIS ITEM WILL BE ORDERED IN FROM OUR SUPPLIER. PLEASE ALLOW 1-2 WORKING DAYS FOR DELIVERY
The Sigma 3D2K KLICK KLOCK Professional Tile Cutter is designed to cut a range of tiles up to 20mm thick. The tungsten carbide scoring wheel on this manual tile cutter scores the tile by pushing the breaker along the surface of the tile. Flipping the handle of the manual tile cutter over and pushing down applies the breaker to the tile. This breaks the tile while the sprung-loaded base plates absorb the impact.
The Sigma 3D2K KLICK KLOCK Series Professional Tile Cutter has a swivelling measurement bar that rotates through 45 degrees in both directions and a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches.
This new version Sigma 3D2K KLICK KLOCK Series Professional Tile Cutter includes the quick-change system on the guide rail allowing the handle type to be changed to a standard or Max if required. These extra handles are not supplied with the manual tile cutter and must be purchased separately.
With a weight of 13.5kg, the maximum straight cut length is 92cm and diagonal cuts can be made on tiles measuring up to 65x65cm.
The Breaking Strength Sigma of 3D2K Professional Tile Cutter is 1200kg.