Sigma 3L SERIES 3 Tile Cutter
The Sigma 3L SERIES 3 Tile Cutter is suitable for cutting a range of tiles up to 20mm thick. This model of manual tile cutter has a tungsten carbide scoring wheel and scores the tile by pulling the breaker along the surface of the tile. Pushing the breaker handle downwards quickly breaks the tile while the sprung-loaded base plates absorb the impact.
The Sigma 3L SERIES 3 tile cutter has a swivelling measurement bar which rotates through 45 degrees in both directions with a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches.
This manual tile cutter includes the quick-change system on the guide rail allowing the handle type to be changed to a Max or Klick Klock if required. These extra handles are not supplied with the tile cutter and must be purchased separately.
With a weight of 7.9kg, the maximum straight cut length is 55cm and diagonal cuts can be made on tiles measuring up to 38x38cm.
The breaking Strength of the Sigma 3L SERIES 3 manual tile cutter is 1050kg